- APPLICATION INSTRUCTIONS
- ORDER REFERENCES
A wafer-based acrylic intumescent thixotropic adhesive, which when set is water resistant. Available in 1 litre, 21/2 litre, and 5 litre tubs. For fixing wood. plasterboard, concrete, foam back of hessian carpet, ceiling tiles, etc. Applied at a coverage of 4m2 per litre. Also for use with Envirograf® intumescent membrane paper — Product 38.
- Provides up to 125 minutes integrity and 55 minutes insulation- Specially designed for bonding paper, card, wood, foams, coated glass cloth, polystyrene, vinyls and foils to each other and most common construction materials
FIRE TEST PERFORMANCE
Used to adhere intumescent paper onto door panels in fire resistance testing to BS476 Part 22 (1987) on various doors with differing constructions, achieving integrity and insulation up to 68 minutes.
Tested to BS476 Part 21 (1987), achieving 90 minutes integrity.
Tested at Cidemco to European Standard EN1363-1 (2000), achieving 2 hours integrity.
Tested at Efectis to EN 1634-1 : 2000.
Surfaces should be cleaned prior to application to ensure good bond results. If applying to wood, rub down with glass paper, dust off to give a ‘KEY’ for the adhesive. Apply evenly to both surfaces with a comb applicator and press the surfaces together. Rub down with a small wallpaper roller to make sure it has a good adhesion. Wipe off any excess using a damp sponge. Check assembly after 20 minutes, in case of movement. Tools can be cleaned in warm water.
Please use the links below to download relevant information as PDF documents:
|IA||IA Intumescent Adhesive||310ml tube||1 litre||2½ litres||5 litres|