- APPLICATION INSTRUCTIONS
- ORDER REFERENCES
A durable plastic trim housing Product 100, designed to give protection to door edges similar in application to Product 70. Supplied in white or brown. Used in areas where risk of damage is high i.e. Hospitals, sheltered housing, care homes, airports, industrial areas and places subject to wheelchair, forklift or small industrial truck traffic. The trim uniquely includes a rebate for a standard intumescent door seal where required making it suitable for both fire and non-fire protective doors. The trim also has a flexible section enabling it to be separated into two sections to fit doors from 42-46mm and 52-56mm thickness. The door protective trim simply slips over the door edge. Peel off the double sided tape backing on the inside edges of the trim. Slip the door trim over the door and fix. Place the seal supplied before removing the double sided tape backing, fix to the rebate and finishing with panel pins.
- Incorporates a rebate for a standard intumescent door seal where required
- Ideal for protecting the edging of both fire and non-fire protective doors
- Extends door life, avoiding expensive replacement
- Ideally suited for application in areas where there is a high risk of damage to door edges such as airports, care homes, factories, hospitals, industrial buildings and more
FIRE TEST PERFORMANCE
Tested to BS476 Part 23 (1987), achieving up to 69 minutes integrity.
Tested to the European Standard EN1634-1 (2000).
The trim has a flexible section enabling it to be separated into two sections to fit doors from 42 – 46mm and 52 – 56mm thicknesses. The door edge protective trim simply slips over the door edge in one piece or in two pieces for thicker doors: separate into two pieces by rocking along the central line until the parts separate. Peel off the backing paper of the self-adhesive strip on the inside edges of the trim, slip the door trim piece(s) over the door edge and fix in place with panel pins through the grooved section (not through the smoke seal). Remove backing paper from the self-adhesive strip on the back of the seal holder and press into the rebate in the door edge protective trim. The trim can be surface mounted or rebated as required.
Please use the links below to download relevant information as PDF documents:
|DET/44||Door edge trim||2100mm||44mm|
|DET/44/B||Door edge trim with brush||2100mm||44mm|
|DET/54||Door edge trim||2100mm||54mm|
|DET/54/B||Door edge trim with brush||2100mm||54mm|