- APPLICATION INSTRUCTIONS
- ORDER REFERENCES
The intent of Regulation 421.1.201 is considered to be, as far as is reasonably practicable, to contain any fire within the enclosure or cabinet and to minimise the escape of flames, and this is as true of metal consumer units as it is of plastic ones.
Envirograf® manufactures a range of intumescent linings, which in the event of a fire will seal up the weak points of non-combustible consumer units (cable entries, for example), containing the fire within the non-combustible box.
FIRE TEST PERFORMANCE
Please use the links below to download relevant information as PDF documents:
Other sizes can be made to order.
INTUMESCENT STRIP FOR METAL CONSUMER UNIT PROTECTING THE BACK OF THE BOX
|SCUB1||100mm x 60mm|
|SCUB2||150mm x 60mm|
|SCUB3||150mm x 100mm|
INTUMESCENT STRIP FOR METAL CONSUMER UNIT PROTECTING THE TOP AND BOTTOM OF THE BOX
|SCU1||300mm x 50mm|
|SCU2||300mm x 75mm|
HOLLOW WALL BACK ENTRY SLEEVE
|SCUS1||105mm x 85mm x 40mm deep|
|SCUS2||85mm x 40mm x 40mm deep|