- APPLICATION INSTRUCTIONS
- ORDER REFERENCES
A 2100mm-long plastic strip with intumescent fire and smoke seal which simply clips in to a routed groove, with no need for adhesive or pins. Available in brown or white as standard.
- Available with brush or rubber smoke seals to seal gaps up to 15mm
- Ideal for replacing existing rebated door seals and upgrading doors
- Can be used on single or double action doors
FIRE TEST PERFORMANCE
By simply routing a groove 5mm deeper than required for the seal itself, the additional grooving if door edges need further planing is eliminated. When the door set correctly closes and is ready for use the carpenter just clips the seal into the groove. Ease of use during redecoration: the seal can be easily removed from the top or bottom of the door using a screwdriver to release it so that decoration can occur without damaging the seal. Once decorating is completed the seal can be clipped back into place.
Please use the links below to download relevant information as PDF documents:
|REF||SIZE (Width x Depth)||FIRE RATING||SMOKE SEAL||FOR USE ON|
|CIS14/P||10mm x 5mm||30 minutes||None||Single or double doors|
|CIS14/30||10mm x 5mm||30 minutes||Angled rubber||Single action doors|
|CIS14/B30||10mm x 5mm||30 minutes||Brush||Single or double doors|
|CIS14/S30||10mm x 5mm||30 minutes||Straight rubber||Single or double doors|
|CIS15/P||15mm x 5mm||60 minutes||None||Single or double doors|
|CIS15/60||15mm x 5mm||60 minutes||Angled rubber||Single action doors|
|CIS15/B60||15mm x 5mm||60 minutes||Brush||Single or double doors|
|CIS15/S60||15mm x 5mm||60 minutes||Straight rubber||Single or double doors|
|CIS15/10||15mm x 10mm||–||Flipper Seal||–|
For single doors, an angled seal will suit a gap size of 6mm down to 3mm.
AVAILABILITY OF THE SEALS
BRUSH: 3mm, 5mm, 7mm, 10mm – For 12mm or 15mm Please Check Stock Before Ordering.
STRAIGHT : 5mm, 7mm, 10mm